Multiple Blade Handle
Accepts #10-15 blades. Handles are able to cut one strip (two blades), two strips (three blades), and three strips (four blades). The spacing can also be changed, spacers are available from 1.5mm - 4.0mm in .5mm increments. The angled handle will better match the curvature of the scalp. Handles require . . . More details
Product Details
Accepts #10-15 blades. Handles are able to cut one strip (two blades), two strips (three blades), and three strips (four blades).
The spacing can also be changed, spacers are available from 1.5mm - 4.0mm in .5mm increments. The angled handle will better match the curvature of the scalp.
Handles require spacers. The chart below shows the number of spacers and blades needed to cut the desired number of strips.
The spacing can also be changed, spacers are available from 1.5mm - 4.0mm in .5mm increments. The angled handle will better match the curvature of the scalp.
Handles require spacers. The chart below shows the number of spacers and blades needed to cut the desired number of strips.
| # of Strips | # of Spacers Needed | # of Blades |
| 1 | 1 | 2 |
| 2 | 2 | 3 |
| 3 | 3 | 4 |
| 4 | 4 | 5 |

Share this page


