|
|
| |
Surgery \ XL-30W
Osada XL-30W Electric Handpiece System
|
|
Variable speed foot control is stageless for precise speed control.
Handpiece chuck is easily removable from micromotor for autoclaving. Autoclavable micromotor housing available at extra cost. Fraize shafts are secured in chuck with simple throw of lever, no external tools are required for tightening.
Solid state transistorized feedback circuitry maintains speed under varying load. Unique double pass air cooling design of micromotor permits continuous operation without overheating. 3/32"; diameter shafts.
Osada Electric Handpiece Systems and related accessory units are warranted to the original purchaser for defects in materials and workmanship for periods of one year for the Power Control Unit and Foot Controller, and six months for the Handpiece, Micromotor and Motorcord. If any such defect is discovered within the warranty period, Osada Inc. will repair or replace the products. This warranty does not apply to defects resulting from abuse, misuse, neglect, or accidental damage.
System Includes: SH-28S handpiece (6 month warranty), micromotor, power control unit (1 year warranty), variable speed foot control, and spray oil. Bur change is made easy by a lever on the handpiece. Speed can be controlled by the variable speed foot switch, or a constant speed can be selected from the console.
Model XL-30W provides RPM from 1,500 through 30,000 and is suitable for Dermabrasion and nail plate modeling.
220 volt is available for international customers.
SH-27 & SH-28S
1:1 handpiece provides 480 gm/cm torque.
SH-29S
2.7:1 Reduction speed handpiece. Used for slower speeds/higher torque. Provides torque up to 1,000 gm/cm at ultralow speeds (550-11,000 RPM with XL-30W).
Osada complete handpiece consists of the handpiece chuck (SH-27, SH-28S, SH-29) which attaches to the LVS micrometer. The AMC is the autoclavable housing that covers the LVS. The MCC6 is the motor cord which goes between the LVS and the control unit.
| ITEM# | DESCRIPTION | PRICES | | XL-30W | Osada Standard Electric Hand Engine System, 110 Volt |  | | XL-30W/220 | Osada Standard Electric Hand Engine System, 220 Volt | | | SH-27 | Osada Handpiece, 20 Degree Twist Ring Handpiece with Nose Guard | | | SH-28S | Osada Handpiece, Standard Lever Chucking Handpiece with Nose Guard | | | SH-29S | Osada Handpiece, Reduction Speed with Lever Chucking Handpiece and Nose Guard, 2.7:1 | | | LVS | Micromotor With Fixed Casing | | | AMC | Autoclavable micromotor housing | | | MCC6 | Osada Motor Cord, Coiled 6 Foot | | | OIL/S | Osada Spray Oil | | | | | To see prices or order, click on the log-in button |
|
|
|
|
|
|
|
