Specifications and FAQ

Specifications:

Metal Hub
Reusable
Supplied with stylet in place through bore to insure patency
Supplied in plastic containers holding 12 needles
Non sterile-must be sterilized before use.
Sizes Available:
- 32 gauge - 1/4", 3/8", 1/2"
- 33 gauge - 1/4", 3/8", 5/8"
Stylet removal: Accomplished by grasping the wire with a hemostat and withdrawing from the pointed end.
Stylet replacement: Probably not necessary, but can be done with magnification, steady hands and a hemostat.
Origin: Japan
Needle bevel: 22 degrees

Can sizes be assorted?

For quantity pricing, different sizes may be assorted, providing each box of a dozen is a single size. We are unable to assort individual dozens.

Which is the best length to use?

Depends on your technique. For example, if you prefer a needle that bends very little, the 1/4" length would be best. If your technique includes putting a little "English" on the needle so that it has a gentle bend putting the distal portion of the shaft more parallel to the surface of the skin, then a longer needle is more appropriate.

Most physicians purchase the 3/8" length believing this provides the best balance of stiffness and flexibility.

How do I sterilize these needles?

See manufacturer suggestions also available under More Information.

We suggest you autoclave these needles shortly before use. If autoclaved well in advance, rusting of the lumen may occur, occluding it (if stylet was removed) or preventing removal of the stylet.

What is the best way to reuse the needles?

Sclerosing agents may corrode the needle, especially saline solutions. To reuse the needle, it should be well flushed with distilled water, forcing it though with a clean syringe.