Accepts #1-15 blades. Handles are able to cut one strip (two blades), two strips (three blades), and three strips (four blades).
The spacing can also be changed, spacers are available from 1.5mm - 4.mm in .5mm increments. The angled handle will better match the curvature of the scalp and now comes with an optional depth guard. Handles require spacers, can accommodate up to 1mm spacer widths.
Handles require spacers. The chart below shows the number of spacers and blades needed to cut the desired number of strips.
The spacing can also be changed, spacers are available from 1.5mm - 4.mm in .5mm increments. The angled handle will better match the curvature of the scalp and now comes with an optional depth guard. Handles require spacers, can accommodate up to 1mm spacer widths.
Handles require spacers. The chart below shows the number of spacers and blades needed to cut the desired number of strips.
# of Strips | # of Spacers Needed | # of Blades |
1 | 1 | 2 |
2 | 2 | 3 |
3 | 3 | 4 |
4 | 4 | 5 |
Freezable | Not Freezable |
Heat Sensitive | No |
Hazardous Shipping Restrictions | Not Hazardous |